TUBE MILL
Production Capability
Tube size - Major: 12.7mm (min) - 42.0mm (max)
Tube size - Minor: 1.5mm (min) - 2.5mm (max)
Wall thickness: 0.2mm (min) - 0.4mm (max)
Strip input speed: 75m/min
Tube length: 100mm - 1500mm (±0.5mm)
Cutting speed rate: Twin servo cut off unit: 220 cuts per minute @ 320mm long tube
Changeover time: 30 minutes
Noise: Less than 80 db.

 

 
16FIN
TUBE FORMING ROLLER STANDS
16FIN2
TUBE MILL DECOILER		 Specification
Single / Dual decoiler; (1900mm OD), (304mm ID), (88.49mm W)
Strip tension control loop
Input roller unit / strip end sensor
EFD strip lubrication
Strip guide
Forming sections: 12 - 16 Horizontal stands, 1 Vertical stand
Dimple section - optional
Straightening station - optional
Direct belt drive transmission
Sub-base for quick changeovers
Cut-off unit; Twin servo
Conveyor
Allen Bradley SLC 500 - PCX
Allen Bradley Panel View
HSE/OSHA approved
CE Marked where applicable
Machine guarding / Worldwide safety standards

Download a pdf of this machine dl reader
download reader download machine

erlogomini HOME | AUTOMOTIVE | DIXON | WALLCOVERING| REBUILDS | CONTACT | HISTORY

 
dixon