AIRWAY MACHINE - HIGH VOLUME
Production Capability
Airway height: 12.5 mm ± 0.05 mm
Airway length: 100 mm - 900 mm
Airway tolerance: ± 3 mm, 100 mm - 600 mm
± 5 mm, 600 mm - 900 mm
Loop count: ±"0" convolution
Airway density: 1.1 mm - 6.4 mm
Airway thickness: 0.07 mm - 0.12 mm ± 0.005 mm
Airway width (max): 100 mm
Airway material: TBD
Cut-off rate: Up to 80 cuts per minute
Operating speed: Up to 300 m/minute max linear strip speed
Machine format: Left to right coil to product
Tolerance / Capability: Cpk 1.67 @ ± 3 sigma
Changeover time: 15 minutes
Noise: Less than 80 db

 

 
16FIN
Forming, Gathering, Pack-Up and Pull-Out Rolls
16FIN2
In-Line Decoilers		 Specification
Centre driven, powered decoiler, single/dual option
Back tension control via load cell
Strip lubrication by EFD
Filter Mist extractor - optional
Form roll cassette complete with entry guides, stripper fingers and Anti wraparound sensor
Gathering roll
Pack up station
Metering roll
Pull-out rolls (density control)
Cut off unit - cut in the root function
Quick release tunnel assembly
Conveyor system
Airway chute if linked to corebuilder/trayer
Machine lubricated sealed for life bearings
Allen Bradley SLC 500 - PLC
Allen Bradley Panel View
HSE/OSHA approved
CE marked where applicable
Machine guarding/Worldwide safety standards

Download a pdf of this machine dl reader
download reader download machine

erlogomini HOME | AUTOMOTIVE | DIXON | WALLCOVERING| REBUILDS | CONTACT | HISTORY
dixon